UBM Vertical Type Cold Roll Forming Machine

Release Date:2020-07-19 19:25

Five Advantages Of Products

  • By using UBM vertical cold roller forming machine, a 1000 square meter steel structure building can be built in 24 hours. Using high speed production speed and panel bite ,10-12 people can make and install nearly 100 arched panels in a day.
  • As the speed increases, the costs of UBM buildings are lower than that of traditional buildings and prefabricated buildings.
  • The UBM mobile factory is transported directly to the construction site, the building is made entirely on site. There is no additional costs to transport building components from the factory to the site.
  • UBM vertical cold roller molding machine installed on the trailer is easy to be towed to remote places by an ordinary vehicles and can be used immediately after arrival.
  • UBM arch is designed to be fully self-supporting and does not require a support structure like a standard steel frame building. A team of about 10 to 15 trained people can build a 1000 square meter building in a day. Users can build their beamless arch buildings with steel or aluminum, both of which have a series of color pre-coatings. We also stored most of the steel coils and immediately transported them to the construction site with the unit.

Product Details

invention patent number: ZL 201010569504.7


The main equipment produced by Sanxing: UBM vertical cold bending roll forming machine,UBM machine, UBM120, UBM240, ultimate building machine, Roll forming machine, forming machine


UBM cold bending forming machine is a separate trailer-type mobile factory for the production of steel structure buildings directly in the construction site. The building material is steel coil. The roller press forming machine was towed to the construction site and installed by a small team of personnel close to the construction position. A set of machines works throughout the production line for forming, bending and cutting. The arc panel has traditional gable shape (straight side wall and slope roof), circular double radius shape (straight side wall and wide arc roof section) or circular arc shape with fixed radius. The finished panel was transported to an assembly area, connected in groups of three pieces, completely using the patented electric seaming machine. The seam connection is waterproof without bolts or other fasteners. After the three boards are assembled, hoist with a crane and  then place the panel part on the pre-prepared foundation. Repeat this process until the required building length is reached and the length is not limited. The interior building is the same as any other prefabricated building and can be added with insulation, electricity, plumbing, lighting, ventilators, heating and cooling systems and partitions.


Advantages of UBM architecture

 By using UBM vertical cold roller forming machine, a 1000 square meter steel structure building can be built in 24 hours. Using high speed production speed and panel bite ,10-12 people can make and install nearly 100 arched panels in a day.   


Low Cost 

 As the speed increases, the costs of UBM buildings are lower than that of traditional buildings and prefabricated buildings. 


Field Manufacturing

        The UBM  mobile factory is transported directly to the construction site, the building is made entirely on site.  There is no additional costs to transport building components from the factory to the site.


Move and access to remote areas

         UBM vertical cold roller molding machine installed on the trailer is easy to be towed to remote places by an ordinary vehicles and can be  used immediately after arrival.


No structural clamps, beams or trusses are required


UBM arch is designed to be fully self-supporting and does not require a support structure like a standard steel frame building. 


Saving manpower            


A team of about 10 to 15 trained people can build a 1000 square meter building in a day. Users can build their beamless arch buildings with steel or aluminum, both of which have a series of color pre-coatings. We also stored most of the steel coils and immediately transported them to the construction site with the unit. 


Upgrading of UBM equipment of sanxing


First generation 


 Two-step production:


Step 1: Advance plate -> forming -> shear


Step 2: Feeding  ->bending


Second generation


This is a new production process with one step for straight and curved plates. Compared with the first generation, the cost of labor is reduced by 30%, and the speed of work is increased by more than 20%


Feeding -> forming --> shearing --> bending


Third generation


By using diesel vehicle and 8 T crane, the truck can be driven directly to the project site.The required panels can be completed in one step, and there is no need for workers to hold and move the panels.. When the panels are ready, the crane on the machine can easily lift them up and fix them in place. Compared with the first generation, the labor cost is reduced by 80%, and the working speed is increased by more than 70%.


Send your message to this supplier

  • To:
  • Yingkou Sanxing Group
  • *Message:
  • My E-mail:
  • Telephone:
  • My Name:
Be Careful:
Submit malicious mail, was repeatedly reported, will freeze the user
This supplier contact you within 24 hours.
There is no inquiry for this product now.
top